An excerpt from my publication record: Over 100 publications and presentations, including 13 peer-reviewed journal papers, many of which were published in high impact factor journals. I have 48 refereed conference proceedings and presentations that are presented and published in leading conferences such as the ASME-Pressure Vessel and Piping Division Conference as well as the famous annual CanWeld Conference of Canadian Welding Bureau Group. My portfolio consists of 9 magazine articles and 32 seminars, workshops, tradeshows, or speeches for designated audiences. I published 5 articles on social media. I am also a co-author of a chapter on "Numerical Aspects of Modeling Welds" for the most top-ranked American Society for Materials (ASM) Handbook. So far, I have 1 provisional patent in my dossier.

 

Refereed Journal Papers Top

  1. Mahyar Asadi, John A. Goldak, ``An Integrated Computational Welding Mechanics with Direct-Search Optimization for Mitigation of Distortion in an Aluminum Bar Using Side Heating”, ASME, J. of Manufacturing Science and Engineering, Volume 136(1) / 011007(10 Pg), 2014. (Get PDF)

  2. John A. Goldak, Mahyar Asadi, ``Challenges in Verification of CWM Software to Compute Residual Stress and Distortion in Weld”, ASME, J. of Pressure Vessel Technology, Volume 136(1) / 011201 (8 Pg), 2014. (Get PDF)

  3. Yaser Alinaghian, Mahyar Asadi, Arnaud Weck, ``Effect of Pre-Strain and Work Hardening Rate on Void Growth and Coalescence in AA5052”, Elsevier, Int. J. Plasticity 53 (2014) 193-205, 2014. (Get PDF)

  4. Ahamd Chamanfar, Lucas Sarrat, Mohammad Jahazi, Mahyar Asadi, Arnaud Weck, Ashok Koul, ``Microstructural Characteristics of Forged and Heat Treated Inconel-718 Disks”, Elsevier, J. of Material and Design 52 (2013) 791–800, 2013. (Get PDF)

  5. Mahyar Asadi, John A. Goldak, ``Exploring the Parametric Design Space to Manage Weld Distortion Using Design of Experiment”, Int’l J. of Product Development Volume 18(1), Special issue on Simulation-Driven Product Development, IJPD 26622, 31-47, 2013. (Get PDF)

  6. Mahyar Asadi, John A. Goldak, ``Industrial-Scale Designer Driven Welding Optimization and Control Using an Integrated Computational Weld Mechanics Framework”, CWA Engage, Canadian Welding Association Journal, Volume 3(1) (9 Pg), 2013. (Get PDF)

  7. Mahyar Asadi, John A. Goldak, ``Combinatorial Optimization of Weld Sequence by Using a Surrogate Model to Mitigate a Weld Distortion”, ”, Springer, Int'l J. of Mechanics and Material in Design, Volume 7(2), 123-139, 2011. (Get PDF)

  8. Mahyar Asadi, Christopher Bayley, John A. Goldak, ``Optimizing Temper Bead Welding by Computational Weld Mechanics and Design of Experiment Matrix”, ASME, J. of Pressure Vessel Technology, 135(3), 031401 (9 Pg), 2011. (Get PDF)

  9. Abdulkareem S. Aloraier, Suraj Joshi, Mahyar Asadi, Rubicel G. Alena, John A. Goldak, ``Microstructure and Hardness Modelling: Effect of Multiple Bead Deposition in Temper Bead Welding Technique”, Int'l J. of Energy & Technology 2 (16) (2010) 1-11, 2010. (Get PDF)

  10. John A. Goldak, Mahyar Asadi, Rubicel G. Alena, ``Why Power per Unit Length of Weld Does not Characterize a Weld”, Elsevier, J. of Computational Materials Science, 2010.01.030, Volume 48(2), 390-401, 2010. (Get PDF)

  11. John A. Goldak, Mahyar Asadi, Jianguo Zhou, Stainslav Tchernov, Dan Downey, ``Optimization of a Weld Overlay on a Plate Structure”, ASME, J. of Pressure Vessel Technology, Volume 132(1), 011402-1-9, 2010. (The most downloaded article of the month). (Get PDF)

  12. Mahyar Asadi, John A. Goldak, Jason Nielsen, Jianguo Zhou, Stainslav Tchernov, Daniel Downey, ``Analysis of Predicted Residual Stress in a Weld and Comparison with Experimental Data Using Regression Model”, Springer, Int'l J. of Mechanics and Materials in Design, Volume 5(4), 353-364, 2009. (Get PDF)

  13. Mahyar Asadi, Amirhossein Kokabi, ``Numerical Modeling and Studying the Effects of Resistance Spot Welding Parameters on Tensile-Shear Strength in Automotive Sheets”, Mathematical Modeling of Weld Phenomena 8, Verlag der Technischen Uniuversitat Graz, ISBN 978-3-902465-69-6, 555- 572, 2007. (Get PDF)

 

Refereed Conference Proceedings Top

  1. Mahyar Asadi, ``AI Challenges in Cyber Manufacturing”, AI Manufacturing Conference 2020, Virtual Conference, August 20-27, 2020. (Get PDF) (Get Presentation) (Watch E-Presentation)

  2. Mahyar Asadi, Mohammad Mohseni, Farzin Golkhosh, Majid Tanbakuei Kashani, Michael Fernandez, Mathew Smith, ``A Hybrid Digital-Twin Platform for Sequence Design in Welded Structures”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2020-21149, Virtual Conference, July 19-24, 2020. (Get PDF) (Get Presentation) (Watch E-Presentation)

  3. Mahyar Asadi, Mohammad Mohseni, Majid Tanbakuei Kashani, Michael Fernandez, Farshid Zolfaghariari, Mathew Smith, ``Active Exploration of Weld Distortion Scenarios on Digital”, CWBA CanWeld Conference and Expo, Halifax Convention Centre, Halifax, NS, Canada, October 9-10, 2019. (Get PDF) (Get Presentation)

  4. Mahyar Asadi, Mohammad Mohseni, Majid Tanbakuei Kashani, Michael Fernandez, Mathew Smith, ``Machine Learning Application for Active Exploration of Weld Sequence Scenarios”, Proceedings of the Materials Science & Technology (MS&T) Conference and Expo, Oregon Convention Centre, Portland, OR, US, Sep 29 - Oct 3, 2019. (Photo 1) (Photo 2) (Photo 3) (Get PDF) (Get Presentation)

  5. Mahyar Asadi, Mohammad Mohseni, Majid Tanbakuei Kashani, Michael Fernandez, Mathew Smith, ``Welding Simulation Integrated with Machine Learning to Train a Meta-Model for Fast Exploration of Various Weld Sequence Scenarios”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2019-93672, San Antanio, TX, USA, July 14-19, 2019. (Get PDF) (Get Presentation)

  6. Mahyar Asadi, Majid Tanbakuei Kashani, Chris Timbrell, Ramesh Chandwani, Mathew Smith, ``Effect of the spot welding simulation strategy on analysis of performance in automotive parts”, Proceedings of the 72th Int’l Institute of Welding (IIW) Annual Assembly and Conference, Bratislava, Slovakia, July 7-12, 2019. (Photo 1) (Photo 2) (Photo 3) (Get PDF) (Get Presentation) (Translated and Published in Polish) (Best Article Letter)

  7. Majid Tanbakuei Kashani, Magdi Mohareb, Mahyar Asadi, Mathew Smith, ``Effect of UOE Forming Process On The Buckling Strains Of Steel Pipes ”, 12th Int'l Pipeline Conference, Calgary, AB, Canada, September 24-28, 2018. (Get PDF) (Get Presentation)

  8. Mahyar Asadi, Majid Tanbakuei Kashani, Mohammad Mohseni, Mathew Smith, ``Thinking About the Weld Flaws - Defining Acceptance Criteria Beyond the Standard”, CWBA CanWeld Conference and Expo, RBC Convention Centre, Winnipeg, MB, Canada, September 12-13, 2018. (Photo) (Award) (Event Summary) (Get PDF) (Get Presentation)

  9. Mahyar Asadi, Majid Tanbakuei Kashani, Mohammad Mohseni, Mathew Smith, ``A Designer-Driven Welding Simulation Analysis to Define the Best Weld Sequence for Panel Structures”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2018-84207, Prague, Czech Republic, July 15-20, 2018. (Photo1) (Photo2) (Get PDF) (Get Presentation)

  10. Mahyar Asadi, Majid Tanbakuei Kashani, Mathew Smith, ``Welding Science as an Engineering Expertise”, Annual Simulia Toronto Technology Day, Four Points by Sheraton, Toronto, ON, Canada, October 19, 2017. (Promo) (Get PDF) (Get Presentation)

  11. Mahyar Asadi, Majid Tanbakuei Kashani, Sepehr Gerami, Mathew Smith, ``Welding Complex Structures with Clear Understanding of Options”, CWA CanWeld Conference and Expo, Place Bonaventure, Montreal, QC, Canada, September 13-14, 2017. (Promo) (Get PDF) (Get Presentation)

  12. Mahyar Asadi, Jeff Henry, Steve Torkildson, Majid Tanbakuei Kashani, Mathew Smith, ``Engineering and Simulations to Investigate and Predict the Failure of the Four Commonly Used Flat Head Designs in Heat Recovery Steam Generators ”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2017-65423, Hawaii, USA, July 16-20, 2017. (Promo) (Get PDF) (Get Presentation)

  13. Mahyar Asadi, Mike Shubert, Majid Tanbakuei Kashani, Mathew Smith, ``Exploring the Complex Welding Engineering Design Space using Computational Weld Mechanics”, the Annual Science in the Age of Experience, Simulia User Conference, McCormick Place, Chicago, IL, USA, May 16-18, 2017. (Promo) (Get PDF) (Get Presentation)

  14. Mahyar Asadi, Majid Tanbakuei Kashani, Mathew Smith, Chris Timbrell, Ramesh Chandwani, Arasch Rodbari, ``A 3D Crack Evolution in Weld Metal, Base Metal and the Transitional Fusion Line under a Mixed Fatigue Loading”, the 14th Int’l Conference on Engineering Structural Integrity Assessment (ESIA14), Manchester, UK, May 16-17, 2017. (Promo) (Get PDF) (Get Presentation)

  15. Mahyar Asadi, Majid Kashani, Sepehr Gerami, Mathew Smith, ``Exploring a Complex Weld Design Space Using a Large Number of Computational Weld Mechanics Analysis, Time Effective”, CWA CanWeld Conference, Edmonton, AB, Canada, October 4-5, 2016. (Get PDF) (Get PDF) (Get Presentation)

  16. Mahyar Asadi, Jun Zhao, Leijun Li, ``An Integrated Welding and Damage Model for Practical Prediction of Creep Life in Welded P91 Alloy”, Proceedings of the ASME 2016 Pressure Vessels & Piping Division Conference, PVP2016-63277, Vancouver, BC, Canada, July 17-21, 2016. (Get PDF) (Get Presentation)

  17. Hadi Soltanzadeh, Jφrg Hildebrand, Matthias Kraus, Mahyar Asadi, ``Modelling Of a Stud Arc Welding Joint for Temperature Field, Microstructure Evolution and Residual Stress”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2016-63285, Vancouver, BC, Canada, July 17-21, 2016. (Get PDF) (Get Presentation)

  18. Mahyar Asadi, Sepehr Gerami, Mathew Smith, ``Welding Models and Simulation for the Perfect Weld”, CWA CanWeld Conference, St. John’s, NL, Canada, September 13-15, 2015. (Promo) (Get PDF) (Get Presentation)

  19. Kevin Bagheri, Mahyar Asadi, ``It is all about GMAW in out of Position; Downward and Upward Welding”, CWA CanWeld Conference, St. John’s, NL, Canada, September 13-15, 2015. (Promo) (Get PDF) (Get Presentation)

  20. Mahyar Asadi, Ghazi Alsoruji, ``A Method to Define the Best Weld Sequence Using a Limited Number of Welding Simulation Analysis”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2015-45556, Boston Park Plaza, MA, USA, July 19-23, 2015. (The best Technical Paper Award) (Get PDF) (Get Presentation) (Letter of Award) (Award)

  21. Mahyar Asadi, Jun Zhao, Avi Banerjee, Leijun Li, ``A Coupled Computational Welding Mechanics and Physics-Based Damage Modeling for Prediction of Remaining Useful Life in Welded P91 Alloy”, Welding Grade P-91 and Other CSEF Alloys (Creep Strength Enhanced Ferritic), CWB Group, Milton, ON, Canada, March 25, 2015. (Get PDF) (Get Presentation)

  22. Mahyar Asadi, John Goldak, ``Welding Models and Computational Welding Mechanics; A course on Welding Science as a Skill of Engineering”, CWA CanWeld Conference and IIW Int’l Congress, Welding in the Arctic, Vancouver, BC, Canada, September 28 - October 1, 2014. (Get PDF) (Get Presentation)

  23. Mahyar Asadi, John Goldak, Arnaud Weck, ``Welding Distortion can be Mitigated If Welding Current and Traveling speed Vary Optimized along a Weld Path”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2014, Anaheim, CA, USA, July 20-24, 2014. (Get PDF) (Get Presentation)

  24. Mahyar Asadi, John A. Goldak, Arnaud Weck, ``Mitigating the Welding Distortion by Adaptive Control of Welding Current and Traveling Speed”, CWA CanWeld Conference, CWC2013, Niagara Falls, ON, Canada, October 28-29, 2013.. (youtube)(Watch Interview Video) (Get PDF) (Get Presentation)

  25. Mahyar Asadi, Dominic Guillot, Arnaud Weck, Ashok K. Koul, Ahmad Chamanfar, Mohammad Jahazi, ``Constructing A Validated Deformation Mechanism Map Using Low-Temperature Creep Strain Accommodation Processes For Waspally (A Nickel-Based Superalloy)”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2013-971832, Paris, France, July 14-18, 2013. (Get PDF) (Get Presentation)

  26. Mahyar Asadi, Vincent Ebacher, Elisa Cantergiani, Rizhi Wang, Robert Winarski, Arnaud Weck, ``Synchrotron X-Ray CT of Wet Cortical Bone’s Nanostructure: Technique and Results”, 30th Annual Meeting Of The Canadian Biomaterials Society, University Of Ottawa, Ottawa, ON, Canada, May 29 - June 1, 2013. (Get PDF) (Get Presentation)

  27. Mahyar Asadi, John A. Goldak, ``An Integrated Computational Weld Mechanics Framework for Exploring the Design Space in Industrial Scale Weld Optimization”, Proceeding of the Materials Science & Technology (MS&T) Conference and Exhibition, Pittsburgh, PA, USA, October 7-11, 2012. (Get PDF) (Get Presentation)

  28. Mahyar Asadi, Dominic Guillot, Arnaud Weck, Subray R. Hegde, Ashok K. Koul, Trevor Sawatsky, Henri Saari, ``Constructing A Validated Deformation Mechanisms Map Using Low-Temperature Creep Strain Accommodation Processes for Nickel-Base Waspalloy”, ”, Proceeding of the Materials Science & Technology (MS&T) Conference and Exhibition, Pittsburgh, PA, USA, October 7-11, 2012. (Get PDF) (Get Presentation)

  29. Ahmed Nasser, John Goldak, Mahyar Asadi, Abd El Halim O. Abd El Halim, ``Computational Weld Mechanics of Hot Crack Nucleation in Nickel-Based Welds”, Proceeding of the Materials Science & Technology (MS&T) Conference and Exhibition, Pittsburgh, PA, USA, October 7-11, 2012. (Get PDF) (Get Presentation)

  30. Mahyar Asadi, John Goldak, ``Industrial-Scale Designer-Driven Welding Optimization and Control Using an Integrated Computational Weld Mechanics Framework”, Proceeding of the Canadian Welding Association (CWA) 3rd Annual Conference, Quebec City, QC, September 9-11, 2012. (Get PDF) (Get Presentation)

  31. Mahyar Asadi, Dominic Guillot, Arnaud Weck, Subray R. Hegde, Ashok K. Koul, Trevor Sawatsky, Henri Saari, ``Constructing A Validated Deformation Mechanisms Map Using Low Temperature Creep Strain Accommodation Processes for Nickel-Base Alloy718”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2012-78092, Toronto, ON, Canada, July 15-19, 2012. (Get PDF) (Get Presentation)

  32. Mahyar Asadi, John A. Goldak, ``Mitigation of Distortion in an Edge-Welded Bar by Optimization Control of the Welding Current and Speed Profile During Welding”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2012-78092, Toronto, ON, Canada, July 15-19, 2012. (Get PDF) (Get Presentation)

  33. Yaser Alinaghian, Mahyar Asadi, Arnaud Weck, ``Non-Local Damage Model To Predict the Effect of Pre-Strain on Ductile Fracture in Aluminium Alloy 5052”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2012-78092, Toronto, ON, Canada, July 15-19, 2012. (Get PDF) (Get Presentation)

  34. Yaser Alinaghian, Mahyar Asadi, Arnaud Weck, ``On the Effect of Pre-Strain and Strain-Path Changes on Void Growth and Linkage in AA5052 Model Materials”, 13th Int’l Conference on Aluminium Alloys (ICAA13), Pittsburgh, PA, USA, June 3 - 7, 2012. (Get PDF)

  35. Yaser Alinaghian, Mahyar Asadi, Arnaud Weck, ``Pre-Strain and Strain-Path Change Effects on Ductile Fracture”, the 24th CMSC, Materials: Atoms to Applications University of Western Ontario, London, ON, Canada, June 5 - 8, 2012. (Get PDF)

  36. John A. Goldak, Mahyar Asadi, ``Computational Weld Mechanics and Optimization of Welding Procedures, Welds, and Welded Structures”, Proceeding of the Int’l Seminar on Welding Science and Engineering (WSE2011), Keynote Session, Osaka University, Osaka, Japan, November 17-21, 2011. (Get PDF)

  37. Mahyar Asadi, John A. Goldak, ``A Framework for Designer-Driven Exploration of Computational Weld Mechanics Design Space”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2012-78092, PVP2011-57917, Baltimore, MD, USA, July 17-21, 2011. (Get PDF)

  38. Mahyar Asadi, John A. Goldak, ``Mitigation of Distortion in an Edge-Welded-Bar by Clamping Parameters”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2012-78092, PVP2011-57917, Baltimore, MD, USA, July 17-21, 2011. (Get PDF)

  39. Mahyar Asadi, John A. Goldak, ``A Direct-Search Computational Weld Mechanics Optimization Using Least-Square Approximation”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2012-78092, PVP2011-57917, Baltimore, MD, USA, July 17-21, 2011. (Get PDF)

  40. Mahyar Asadi, John A. Goldak, ``Sensitivity of Hot Cracking to Weld Procedure Parameters and Transverse Traction”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2012-78092, PVP2011-57917, Baltimore, MD, USA, July 17-21, 2011. (Get PDF)

  41. John A. Goldak, Mahyar Asadi, ``The Evolution of Stress and Strain Tensors in Welds with Mitigation of Residual Stress and Distortion”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2012-78092, PVP2011-57917, Baltimore, MD, USA, July 17-21, 2011. (Get PDF)

  42. Mahyar Asadi, John A. Goldak, ``Optimizing Temper Bead Welding by CWM and DOE”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2010-25744, Bellevue, Washington, July 18-22, 2010. (Get PDF)

  43. John A. Goldak, Mahyar Asadi, ``Challenges in Verification of CWM Software to Compute Residual Stress and Distortion in Weld”, Proceedings of the ASME Pressure Vessel & Piping Conference, PVP2010-25744, Bellevue, WA, USA, July 18-22, 2010. (Get PDF)

  44. Mahyar Asadi, John A. Goldak, ``Comparison and Analysis of Prediction of Residual Stress in a Weld with Experimental Data”, 5th Graduate Student Research Institutional Conference, Mechanical and Aerospace Engineering, Carleton University, Ottawa, ON, Canada, December 3, 2008. (Get PDF)

  45. Mahyar Asadi, Amirhossein Kokabi, ``Numerical Modeling and Studying the Effects of Resistance Spot Welding Parameters on Tensile-Shear Strength in Automotive Sheets”, Proceeding of 8th Int’l Seminar of Numerical Analysis of Weldability, Seggau, Graz, Austria, September 25-27, 2006. (Get PDF)

  46. Mahyar Asadi, Amirhossein Kokabi, ``DOE Modeling of Strength in Spot Resistance Welding for Car Manufacturers”, 7th National Conference in Welding & Inspection, Tehran, Iran, December 6-7, 2005. (Get PDF)

  47. Mahyar Asadi, Davood Ghods, ``Loss & Cost Reduction System”, 2nd Quality Engineering Services Chain National Conference, Tehran, Iran, November 9, 2005. (Get PDF)

  48. Mahyar Asadi, Amirhossein Kokabi, ``Modeling of Parameters in Spot Resistance Welding for Automotive Industries”, 2nd Int’l Conference in Welding, Tehran, Iran, March 10-13, 2002. (Get PDF)

 

Magazine & Freelance Articles Top

  1. Mahyar Asadi, Mathew Smith, ``Using Computational Weld Modeling to Control Distortion; Challenges and Practical Benefits of Using this Tools are outlined”, The Welding Journal (AWS), p 21-24, October 2018. (Get PDF)

  2. Mahyar Asadi, ``Training to be Innovative beyond the Standard, An Essential Skill of Welding Engineering”, The WELD Magazine, p 34-35, Spring 2018. (Get PDF)

  3. Mahyar Asadi, ``Realistic Creep-Life Prediction in Weld for the Energy Sector”, Appeople Magazine, Applus Company, No 21, Outstanding Project Section,  p 6-7, May 2018. (Get PDF)(Website)

  4. Mahyar Asadi, Sepehr Gerami, Mathew Smith, ``Exploring a Complex Weld Design Space Using a Large Number of Computational Weld Mechanics Analysis, Time Effective”, The CWA Journal, p 82-88, April 2017. (Get PDF)

  5. Kevin Bagheri, Mahyar Asadi, ``It is all About Position: GMAW Downward and Upward Welding”, The CWA Journal, p 34-40, June 2016. (Get PDF)

  6. Mahyar Asadi, Sepehr Gerami, Mathew Smith, ``Welding Models and Simulation for the Perfect Weld”, The CWA Journal, p 70-74, April 2016. (Get PDF), Translated to French, The CWA Journal, p 82-86, December 2017. (Get PDF)

  7. An interview with Kevin Bagheri on a course initiated and developed by Mahyar Asadi, ``Students Enjoying the Academic World of Welding”, The CWA Engage, p 52-59, July 2015. (Get PDF)

  8. Mahyar Asadi, John Goldak, ``Welding Models and Computational Welding Mechanics; A course on Welding Science as an Engineering Skill”, The CWA Journal, p 52-59, June 2015. (Get PDF)

  9. Mahyar Asadi, John Goldak, ``Industrial-Scale Designer Driven Welding Optimization and Control Using an Integrated Computational Weld Mechanics Framework”, The CWA Journal, p 42-52, December 2014. (Get PDF)

 

Seminars, Workshops, Trade Shows, & Talks Top

  1. Mahyar Asadi, ``Basics of Welding Metallurgy for Non-Metallurgist”, Welding Industry Day Vancouver, CWB Group, February 26, 2020, Vancouver, BC, Canada. (Photo) (Agenda) (Presentation)

  2. Mahyar Asadi, Mathew Smith, ``Welding Engineering Services Beyond the Standard”, Keifner Annual Employee Meeting, Applus North America, February 24-25, 2020, Columbus, OH, US. (Presentation)

  3. Mahyar Asadi, Mohammad Mohseni, Michael Fernandez, ``Hybrid Digital-Twins Framework for Manufacturing”, NGen Pitch for Funding Canadian Manufacturing Technology Show (CMTS), October 2, 2019, Toronto, ON, Canada. (Photo 1) (Photo 2) (Manuscript) (Presentation)

  4. Mahyar Asadi, ``Welding Distortion Engineering”, Robert Allan Ltd, June 19, 2019, Vancouver, BC, Canada. (Presentation)

  5. Mahyar Asadi, ``Trends in Welding Distortion Engineering”, ASM BC Chapter Technical Meeting, February 7, 2019, Vancouver, BC, Canada. (Event Flyer) (Photo 1) (Photo 2) (Photo 3) (Photo 4) (Presentation)

  6. Mahyar Asadi, Majid Tanbakuei Kashani, Ramin Abolghasemi, Mathew Smith, ``Together with Applus Team, Booth Running of Advanced Welding Engineering Services at Applus Canada”, 12th Int'l Pipeline Expo, September 24-28, 2018, Calgary, AB, Canada. (Photo 1) (Photo 2)

  7. Mahyar Asadi, Philip van Meer, ``Booth Running of Advanced Welding Engineering Services and Inspection”, the Pressure Vessel & Piping Expo ASME PVP2018, July 15-20, 2018, Prague, Czech Republic. (Photo 1) (Photo 2)

  8. Mahyar Asadi, ``Welding Modeling and Simulation in Practical Weld Engineering”, Amirkabir University of Technology, Mechanical Dept. organized by the Int'l Institute for Future Knowledge Development of Iranians together with Nafta Industry, Tehran, Iran, July 11, 2018. (Promo) (Photo 1) (Photo 2) (Appreciation) (Presentation)

  9. Mahyar Asadi, ``Microstructure Modeling in Steel Welding”, Sharif University of Technology, Materials Dept., Tehran, Iran, July 10, 2018. (Abstract) (Presentation)

  10. Mahyar Asadi, Sepehr Gerami, Mathew Smith, Adam Lowe, ``Booth Running of Welding Engineering Services at ApplusRTD SKC Engineering”, CanWeld Expo 2016 - CanWeld Conference and Exposition, Edmonton EXPO Centre, Edmonton, AB, Canada, October 4-5, 2016. (Photo)

  11. Mahyar Asadi, Sepehr Gerami, Mathew Smith, Adam Lowe, ``Booth Running of Welding Engineering Services at ApplusRTD SKC Engineering”, IPC 2016 - Int’l Pipeline Conference and Exposition, The TELUS Convention Centre, Calgary, AB, Canada, September 26-30, 2016. (Photo 1)(Photo 2)(Photo 3)

  12. Mahyar Asadi, Sepehr Gerami, Mathew Smith, James Allan, Adam Lowe, ``Booth Running of Welding Engineering Services at ApplusRTD SKC Engineering”, PVP 2016 - Pressure Vessel and Piping Exhibition, Hyatt Regency, Vancouver, BC, Canada, July 18-19, 2016. (Photo 1)(Photo 2)(Photo 3)

  13. Mahyar Asadi, ``Applications of Modeling and Simulation in Welding”, IWREC (Iranian Welding Research and Engineering Centre) IIW-ANB, Tehran, Iran, January 14, 2016. (flyer) (Appreciation Certificate)

  14. Mahyar Asadi, Mathieu Legrand, Nigel Healy, ``Booth Running of Welding Engineering Services at SKC Engineering”, Fabtech 2015 - North America's Largest Metal Forming, Fabricating, Welding and Finishing Event, BOOTH C1726 , McCormick Place, Chicago, IL, USA, November 9-12, 2015. (flyer)(Photo)

  15. Mahyar Asadi, ``Welding Science as an Engineering Skill”, University of British Columbia (UBC), Collective Seminar, Materials Engineering Dept., Dept. of Mechanical Engineering, and Naval Architecture and Marine Engineering Dept., Vancouver, BC, Canada, May 13, 2015. (Get Presentation)

  16. Mahyar Asadi, ``Assessment of Fatigue Life in CuNi Pipe, Fillet Welds and But Welds”, Babcock Canada Inc., Victoria, BC, Canada, April 23, 2015. (Get Presentation)

  17. Mahyar Asadi, ``Practical Microstructure Modeling of Welding for Perfect Weld”, American Society for Metals (ASM), BC Chapter, Richmond, BC, Canada, April 15, 2015. (Get Presentation)(Appreciation)

  18. Mahyar Asadi, ``Obtaining the Perfect Weld Using Welding Simulation and Models”, American Welding Society (AWS), BC Chapter, Delta, BC, Canada, February 26, 2015. (Get Presentation) (Get Flyer) (AWS Journal Report)

  19. Mahyar Asadi, ``Obtaining the Perfect Weld Using Welding Simulation and Models”, SKC NDT and MXV, Surrey, BC, Canada, February 19, 2015. (Get Presentation)

  20. Mahyar Asadi, ``Obtaining the Perfect Weld Using Welding Simulation and Models”, CWS Industries, Surrey, BC, Canada, February 13, 2015. (Get Presentation)

  21. Mahyar Asadi, John Goldak, ``A Workshop on Computational Weld Mechanics”, CWA CanWeld Conference 2014 and IIW International Congress, Welding in the Arctic, Vancouver, BC, Canada, October 2, 2014. (Announcement) (Full Program) (Congress Photo)

  22. Mahyar Asadi, ``Welding Science as an Engineering Skill; Part 1, distortion and residual stress”, Materials Dept, University of British Columbia, Vancouver, BC, Canada, September 28, 2014. (Get Abstract) (Get Presentation)

  23. Mahyar Asadi, ``Value-Selling Strategy for R&D in Welding; focused on Fronius cladding system”, Fronius Canada, Mississauga, ON, Canada, September 2014. (Get Presentation)

  24. Mahyar Asadi, ``Introduction to Materials and Materials in Manufacturing”, Materials Science and Engineering Dept, University of Toronto, Toronto, ON, Canada, July 2014. (Get Presentation 1)(Get Presentation 2)

  25. Mahyar Asadi, ``Deformation Mechanism Map for SAC alloy using Low Temperature Creep Strain Accommodation Processes”, Cistel Technology, Ottawa, ON, Canada, April 2014. (Get Presentation)

  26. Mahyar Asadi, ``Industrial-Scale Designer-Driven Welding Optimization and Control Using an Integrated Computational Welding Mechanics Framework”, Mechanical Engineering Dept, University of North Carolina, Charlotte, NC, USA, July 2013. (Get Presentation)

  27. Mahyar Asadi, ``Constructing Deformation Mechanisms Map for Nickel-Base Turbine Disc Alloy 718”, Mechanical Engineering Dept, the University of Ottawa, March 2012.

  28. Mahyar Asadi, ``Deformation Mechanisms Maps for Turbine Disk Alloys”, Mechanical Engineering Dept, the University of Ottawa, October 2011.

  29. Mahyar Asadi, ``Verification and Validation of a Computational Mechanics Code”, Civil and Environmental Engineering Dept, Carleton University, March 2010.

  30. Mahyar Asadi, ``Fatigue assessment of weld in automotive body”, Mechanical and Aerospace Engineering Dept, Carleton University, February 2009. (Get Presentation)

  31. Mahyar Asadi, ``Stochastic Estimation of Reliability for Welded Structure”, Mechanical and Aerospace Engineering Dept, Carleton University, November 2008.

  32. Mahyar Asadi, ``Standardizing Spot Resistance Welding for IranKhodo’s White-Body Assembly”, Mechanical and Aerospace Engineering Dept, Carleton University, November 2008. (Get PDF)

 

Social Network Articles Top

  1. Mahyar Asadi, Mohammad Mohseni, ``MTRL 472 - Welding and Joining in Materials”, Youtube Channel, Lab Videos (My UBC course) on How to Prepare a Weld Model using QWelding Interface, Published on Fall, 2020.  (See Videos)

  2. Mahyar Asadi, Mohammad Mohseni, ``MTRL 472 - Welding and Joining in Materials”, Youtube Channel, Lab Videos (My UBC course) on How to Prepare a Weld Model using Abaqus Welding Interface, Published on Fall, 2018.  (See Videos)

  3. Mahyar Asadi, ``Smart Welding Engineering and Capabilities”, Article on LinkedIn, Published on June 7, 2018.  (See Article)

  4. Mahyar Asadi, ``Training of Welding Science as an Engineering Skill”, Article on LinkedIn, Published on December 1, 2017.  (See Article)

  5. Mahyar Asadi, ``Computational Engineering of Weld Fracture”, Article on LinkedIn, Published on June 1, 2017.  (See Article)

 

Refereed Posters Top

  1. Mahyar Asadi, Jean Michel Guan, Rizhi Wang, Robert Winarski, Arnaud Weck, ``Synchrotron X-Ray CT of Trabecular Bone’s Nanostructure: Technique and Results”, 7th World Congress of Biomechanics, Abstract Accepted, Boston, MA, July 2014.  (Get PDF)

  2. Mischaλl Raj, Mahyar Asadi, Julio Angel Infante Sedano, Abdolmajid Mohammadian, Ousmane Seidou, Arnaud Weck, ``Studying an Economical Solar Selective Coating for Practical Solar Thermal Technologies”, ASM Poster Competition, University of Ottawa, Ottawa, Ontario, March 2013.  (Get PDF)

  3. Dominic Guillot, Mahyar Asadi, Trevor Sawatzky, Ashok Koul, Henry Saari, Arnaud Weck, ``Constructing a Validated DMM for Nickel-Base Alloy 718”, ASM Poster Competition, Awarded the best poster, Carleton University, Ottawa, Ontario, March 2012.  (Get PDF)

  4. Yaser Alinaghian, Mahyar Asadi, Arnaud Weck, ``Effect of Pre-Strain on Ductile Fracture in Aluminum Alloy 5052”, ASM Poster Competition, Carleton University, Ottawa, Ontario, March 2012.  (Get PDF)

  5. Mahyar Asadi, Komeil Kazemi, John A. Goldak, ``Hot Cracking Susceptibility Framework”, ASM Poster Competition, Queens University, Kingston, Ontario, March 2011. (Get PDF)

  6. Mahyar Asadi, Rubisel G. Alena, John A. Goldak, ``Temper Bead Welding Procedure”, ASM Poster Competition, University of Ottawa, Ottawa, Ontario, February 2010. (Get PDF)

  7. Mahyar Asadi, John A. Goldak, ``Prediction of Residual Stress in a Bead-on-Plate Constrained Weld and Comparison with Experimental Data”, ASM Poster Competition, Carleton University, Ottawa, Ontario, February 2009. (Get PDF)

 

Refereed Book Chapter Top

  1. John A. Goldak, Mahyar Asadi, Lennart Karlsson, ``Numerical Aspects of Modeling Welds”, ASM Handbook, Volume 6A, Welding Fundamentals and Processes, 2012. (Get PDF - Read Only, ASM Copyrigth)

 

 

Patent Top

  1. Mahyar Asadi, US 62/647,112, ``Weld Sequence Design based on Sequential Rigidity Calculation Using Simulation Tools”, Provisional Patent, SKC Engineering, March 2018. (Confirmation)

 

 

PhD Thesis Abstract Top

Development of a computational weld mechanics (CWM) framework that automates multiple setups and evaluations is proposed and implemented to practically explore a design space by given design of experiment (DOE) matrices. Saving an expert-user's time to prepare several analyses and allocating CPUs to be utilized efficiently make this framework cost effective and time effective to manage designer-driven optimization and control application of CWM. A validation analysis is conducted to identify the CWM control vector that minimizes the difference between the computed and experimental data. Actual CWM problems with continuous and/or discontinuous parametric design spaces are solved in this framework to minimize weld distortion using derivative-free optimization algorithms that become attractive in this framework. (Get PDF) (Get Presentation) (Library Catalogue) (Download PDF from Carleton University)

Other Thesis Top

Master Degree; "Study and Model of the Effect of Parameters in Spot Resistance Welding for a Range of Different Sheet Thickness Used in Automotive Industries". (Get PDF) (Get Presentation).

Bachelor Degree;"Computer Aided Optimal Design of Preform Die in Forging" including an internship in SAPCO (Supplying Automotive Parts Co.) (Get PDF) (Internship Letter PDF).